How To Install INNOVV Camera System on E-Bikes, E-Motorcycles?

We are very happy about receiving many inquiries about how to install the INNOVV dashcam on an e-motorcycle or e-bike, so we have compiled the following guidance. We hope this will help you install INNOVV DashCam on your bikes.

E-Motorcycle

Power Connection

E-Motorcycles has 12V output to the headlight and tail light, connect the red & yellow wires from the converter to the positive wire of tail light, and black wire to the negative of tail light if keep the video format as the default as TS.

If changed the video format to be MP4, find the 12V output from the battery, and connect them with the red and black wires separately, Connect the yellow wire to the positive end of the tail light.

Camera Mounting

It is the same as regular motorcycles.

E-Bike

( With headlight & tail light )

Power Connection

E-Bikes which has 12V output to the headlight and tail light, connect the red & yellow wires from the converter to the positive wire of tail light, and black wire to the negative of tail light if keep the video format as the default as TS.

If changed the video format to be MP4, find the 12V output from the battery, and connect them with the red and black wires separately, Connect the yellow wire to the battery key.

Camera Mounting

Can use bike bar mount like the below. (We have the stock)

E-Bike

( Without lights )

Power Connection

If without lights, just check the voltage of the battery, if the voltage is 12V or 24V, connect the red & yellow wires from the converter to the positive wire of the battery key switch, and black wire to the negative of the battery key switch if keep the video format as the default as TS.

If some have a USB charger, can connect the camera to it and keep the video format as the default as TS.

Camera Mounting

Can use bike bar mount like the above. (We have the stock)

E-Motorcycle