Received my K2 today, put it on my desk to bench test with a USB charger/battery I have. Appears to power up but cannot find the wifi SSID...hmmmm. A search here shows some others having this problem but no one sharing how they got it solved. I downloaded the latest firmware to an 8gb card I had (I did have a class 10 U3 Samsung 256 installed). Firmware update appears to go well. Still no SSID. I decided to try an AC Plug charger with USB port, still no go. Finally got it! Moved the GPS antenna away from the DVR and cameras, separated the all the bits, and bingo! While this may seem silly and the instructions mention the separation to prevent interference, I'm sure I am not the first (nor last) to get wrapped around the axle! Installed the 256gb card, connected up, formatted and ready to fit it to the bike. Once I am installed and settled, I'll load the firmware to improve the video. Thought I would share...
top of page
bottom of page
I tried lots of maneuvers but really the only thing that worked for me was 'updating' firmware to the last 2019 version. Then WIfi recognized by my phone. Newer firmwares avialable for download dated 2020 did not permit Wifif recognition. Might send Innovva an invoice for 6 hours of my time at full billable rate. Shameful.